Home > Exhibition > Content

Automatic metering powder quantitative packaging machine regular maintenance of three matters needing attention

Oct 17, 2019

(1) lubrication: the gear mesh, the oil hole of the bearing with the seat and the moving parts shall be filled with oil for lubrication on a regular basis. Once per shift, the reducer is strictly prohibited from running without oil.When filling lubricating oil, it is necessary not to put the oil tank on the rotating belt in case of skidding or premature aging and damage of the belt.

(2) maintenance: before using automatic metering powder quantitative packaging machine, to check the screw, the various parts can not have loose phenomenon, otherwise, will affect the normal machine far, should be paid attention to and electrical parts for the waterproof, moistureproof, anticorrosive, rat, to ensure the electric cabinet and terminals clean spot, in case of electrical failure, after downtime, should make the two heat sealing body in the open position, in case of burning the packaging materials.

(3) cleaning: after downtime, to clean the metering section in time, often should clean heat sealing machine, to ensure that the packing finished sealing lines clear, to the scattered materials should clean up in time, to facilitate clean the parts, and thus prolong its service life, better also often clean the dust inside the electrical cabinet, in case caused by short circuit or poor contact electrical fault.