Home > Exhibition > Content

Knowledge of proper operation and maintenance of high precision powder filling packing machine

Oct 10, 2018

High-precision powder filling packing machine plays an important role in the processing industry and is one of the necessary equipment for the production and processing of many food, beverage, medicine and daily chemical enterprises.For enterprises, the use of high-precision powder filling machine is not a problem, but in its maintenance and maintenance, but few people know.First, before the high-precision powder filler, bottle brush and bottle washer,

1. Install and then debug. Read the instructions carefully and prepare the tools before debugging.                                                                   2. After the installation of the bottle-filling machine, the bottle brush machine and the bottle washer, adjust the filling track and the bottle receiving plate to level, and fill the liquid storage tank with materials. All electrical switches are in the closed position.                                                                               3. The filling container is inserted into the workbox to connect external power supply. The power outlet must be a three-pin socket with a reliable grounding line to prevent the machine shell from leaking electric shock.                                                                                                                     4. The mounting support plate shall hold the filling rack against, and use the finger to lift the positioning sleeve on the filling head. The positioning sleeve shall be moved up and down flexibly, and the filling needle shall be exposed or retracted into without obstruction.                                                                         5. The switch under the liquid storage barrel of the high-precision powder filling machine should be moved to the open position, so that materials can flow into the total metering pump, adjust the screw on the crank according to the total filling amount of each container, turn the knob of the filling speed plate to about 20 degrees, and then move the switch on the filling speed plate to the open position.                                                                                                                       6. When the liquid flowing out of the filling head is set to be fixed, tighten the hydraulic nut to adjust the amount, cover the filling head shell, and loosen the support plate of the filling rack.After the use of the high-precision powder filler machine, it should pay attention to its maintenance. During the maintenance, remove the piston and fixed screw at the same time, so as not to affect the process requirements of the first one.Before the piston powder filler is cleaned, the remaining product should be cleaned and then the barrel should be filled with soft cleaning liquid.The cylinder has been lubricated at the time of delivery, please do not open or add any lubricating oil, ensure the high-precision powder filling machine surface cleaning and sanitation, when not working power cut processing.In addition, the maintenance and correct use of high-precision powder filling machine, but also regular testing, debugging.Only in this way can the high-precision powder filler work healthily and stably.                                                                                             With the continuous improvement of living standards, people demand for beverage and cosmetic products continue to increase, enterprise development, to drink high precision powder filling machine, bottle brush machine and bottle machine more and more, the use of high precision powder filling machine problems should be paid attention to in use is increasingly sharp, therefore, in order to better production enterprises, the maintenance work is very necessary.