Home > News > Content

How To Properly Maintain Powder Packaging Machine And Main Parts

Nov 08, 2018

Powder packaging machine is a special machine designed for powder material packaging. Powder packaging machine has the characteristics of high measurement accuracy, fast packaging speed, no dust pollution, smooth sealing without powder and beautiful bag type.Automatic packaging of powdery materials used in pharmaceutical, food, cosmetic, chemical products, such as milk powder, soybean powder, facial powder, health tea, flour, etc.

 

The parts of powder packaging machine are lubricated

 

1. The tank part of the machine is equipped with an oil meter, which should be filled once before driving.

 

2. The oil level of the worm gear box is that all the worm gear intrudes into the oil. For regular use, the oil shall be replaced every three months.

 

3. When filling the machine, do not let the oil spill out of the cup, and do not flow around the powder packaging machine and the ground.Because the oil easily makes the material pollution, affects the product quality.

 

2. Maintenance of powder packaging machine

 

1. Inspect the parts regularly, once a month, check whether the moving parts such as worm gear, worm, bolts and bearings on the lubrication block rotate flexibly and wear, and repair defects in time if found, and do not force the use;

 

2. The powder packaging machine shall be used in dry and clean room, and shall not be used in places with acid and other corrosive gases in the atmosphere;

 

3. When the machine is finished or stopped, the rotary drum shall be taken out for cleaning and brushing the remaining powder in the hopper, and then the powder shall be installed properly to prepare the powder packaging machine for the next use;

 

4. When the roller moves back and forth in work, adjust the M10 screw on the front bearing pawn to the appropriate position.If the shaft moves, adjust the M10 screw on the back of the bearing bracket to the appropriate position, adjust the clearance so that the bearing does not make any noise, and turn the pulley of the belt by hand properly. If it is too tight or loose, it may damage the machine.