Oven features: Shell made of high-quality cold-rolled steel plate, the surface electrostatic spray technology, the appearance of new, durable. The studio is made of high-quality stainless steel or cold-rolled steel plate, with high temperature, corrosion resistance, no black smoke and so on. Activities of the pull-type grid, an increase of the storage space inside the box door with double tempered glass observation window, you can always observe the work of the heated objects in the situation. Oven is the use of heating wire to heat the object drying equipment.
It is suitable for baking, drying, heat treatment and so on, the sensitivity is usually ± 1 ℃, which is higher than the room temperature 5 ~ 300 ℃ (some high 200 ℃). It is a lot of models, but the basic structure is similar to the general by the box, electric heating system and automatic temperature control system composed of three parts. Its use and precautions are summarized as follows:
1. Oven must be placed in the indoor dry and level, to prevent vibration, corrosion.
2. Safe use of electricity should pay attention to, according to the power consumption of the oven installed enough capacity power knife. Use adequate power leads and a good grounding wire.
3. With an electrical contact mercury thermometer-type thermostat oven should be electric contact thermometer two wires were connected to the top of the two terminals on the box. The other will be an ordinary mercury thermometer inserted into the exhaust valve, (exhaust valve thermometer is used to proofread the mercury thermometer and observe the actual temperature inside the box) to open the exhaust valve hole. Adjust the electrical contact mercury thermometer to the required temperature after tightening the screws on the steel cap to achieve the purpose of temperature. But must pay attention to regulation when the iron will not be directed to the scale outside the scale.
4. When everything is ready to be placed in the oven after the test sample, and then connect and turn on the power, the red indicator light that the box has been heated. When the temperature reaches the controlled temperature, the red light turns off the green light to start constant temperature. In order to prevent temperature control failure, must also look after.
5. The test sample can not be arranged too closely. Thermal plate prohibit release test items, so as not to affect the upward flow of hot air. Baking of flammable, explosive, volatile and corrosive substances is prohibited.
6. When you need to observe the situation in the sample room, you can open the outer box door, through the glass door observation. But the door as little as possible to open as well, so as not to affect the temperature. Particularly when operating at 200 ° C or higher, opening the door may cause the glass door to burst and burst.
7. Have a blast oven, in the heating and constant temperature process must be blower open, or affect the uniformity of the studio temperature and damage to the heating element.
8. work should be promptly cut off after the power to ensure safety.
9. Keep inside and outside the oven clean.
10. When used, the temperature should not exceed the maximum operating temperature of the oven.
11. To prevent burns, use special tools when taking test samples.
We Focused on bakery equipments and packing machine about 10 years. Started as simple bread production line , now ,we have 2 main plant. One is complete bakery and pastry plant, including bread,cake,biscuit,pastry making machine. Another is packaging plant. It includes bakery product packing machine ,tea bag packing machine, box wrapping machine ,weigh filler and other vertical packing machine.